Introduction:
one. HS series slurry pump is made for the steady pumping of substantial abrasive, higher density slurries with minimal maintenance specifications. The sporting components are made of extremely chrome or and rubber. It will keep substantial effectiveness more than the dress in daily life of its components.
two. The metallic damp parts and rubber kinds can be interchangeable for dealing with different liquids or slurries.
3. HS slurry pumps are obtainable in sizes ranging from one inch to 18 inch discharge and function large efficiency functionality capable of circulation rates from 10.eight to 5400 m³/h and heads up to one hundred twenty five meters for large head models.
Functions:
one. Cylindrical structure of bearing assembly: handy to modify the room amongst impeller and entrance liner
and can beremoved fully
2. Interchangeable anti-abrasive damp elements created of high-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs give higher running pressure capabilities
and an extra measure of safety.
four. The discharge branch can be oriented to any 8 positions at the interval of 45 degrees
5. A variety of push varieties: DC(immediate link), V-belt generate, equipment box reducer, hydraulic couplings, VFD,
SCR control, etc
six. The shaft seal employs the packing seal, expeller seal and mechanical seal
Normal Software:
• Mining | • Mineral processing | • Coal prep | • Cyclone feeds |
• Tunnel | • Chemical slurries | • Tailings | • Mill grinding |
• Ash handing | • Paper and Pulp | • Waste sludge | • Coarse sand |
• Lime mud | • Phosphoric acid | • Dredging | • CZPT |
• Alumina Business | • Power Plant | • Potash Fertilizer Plant | • Other industries |
Design | Max Electricity (Kw) |
Inlet & Outlet dimensions (inch) | Substance for Use Areas | Movement Fee (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
m³/hr | l/s | |||||||
25HS-B | fifteen | 1.five/one | M | 12.six~28.8 | three.five~eight | six~sixty eight | 1200~3800 | 152 |
R | 10.8~twenty five.2 | three~seven | 7~52 | 1400~3400 | 152 | |||
40HS-B | 15 | two/1.five | M | 32.4~72 | 9~twenty | six~58 | 1200~3200 | 184 |
R | 25.two~54 | seven~fifteen | 5.5~41 | a thousand~2600 | 178 | |||
50HS-C | thirty | 3/2 | M | 39.6~86.4 | eleven~24 | twelve~64 | 1300~2700 | 214 |
R | 36~75.six | ten~21 | thirteen~forty six | 1300~2300 | 213 | |||
75HS-C | thirty | 4/3 | M | 86.4~198 | 24~55 | 9~fifty two | one thousand~2200 | 245 |
R | seventy nine.two~a hundred and eighty | 22~fifty | five~34.five | 800~1800 | 245 | |||
100HS-D | 60 | six/four | M | 162~360 | forty~100 | twelve~fifty six | 800~1550 | 365 |
R | 144~324 | 40~ninety | 12~45 | 800~1350 | 365 | |||
150HS-E | 120 | 8/six | M | 360~828 | a hundred~230 | ten~61 | five hundred~1140 | 510 |
R | 324~720 | 90~200 | seven~49 | 400~one thousand | 510 | |||
200MS-E | 120 | ten/8 | M | 666~1440 | 185~400 | 14~sixty | 600~1100 | 549 |
200HS-ST | 560 | ten/8 | M | 612~1368 | 170~380 | 11~sixty one | 400~850 | 686 |
R | 540~1188 | one hundred fifty~330 | twelve~fifty | 400~750 | 686 | |||
250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | seven~sixty eight | 300~800 | 762 |
R | 720~1620 | two hundred~450 | 7~45 | 300~650 | 762 | |||
300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
R | 1152~2520 | 320~700 | thirteen~forty four | 300~500 | 965 | |||
350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
450HS-TU | 1200 | twenty/18 | M | 2520~5400 | seven-hundred~1500 | 13~fifty seven | two hundred~400 | 1370 |
25HHS-C | 30 | one.5/one | M | 16.2~34.two | four.5~nine.5 | twenty five~ninety two | 1400~2200 | 330 |
50HHS-D | sixty | 3/2 | M | 68.4~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
75HHS-E | a hundred and twenty | four/three | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
100HHS-E | 120 | 6/four | M | 324~720 | ninety~200 | 30~118 | 600~one thousand | 711 |
150HHS-S | 560 | eight/six | M | 468-1008 | 130~280 | 20~ninety four | five hundred~a thousand | 711 |
For the material of wearing areas,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to get in touch with us any time for specifics.
Your inquiry will get our prompt interest and reaction !