Horizontal High Head Building Booster Water Pump with Multistage Impellers

Horizontal High Head Building Booster Water Pump with Multistage Impellers

Substantial strain very hot drinking water boosting pump multistage pump

=== OVERVIEW ===

High strain very hot water boosting pump multistage pump the exceptional hydraulic types are substantial-effectiveness, energy-preserving and have wide efficiency variety, running properly&steady, minimal noise, extended existence.

1. Multi phase pump can produce the neuter mineral water which reliable particles percent≤ one.5%(sound Dia, < 0.5mm) and other similar sewage
2.Compact and realistic framework
three.Shaft seal can be mechanical seal or packing seal
four.Superior hydraulic product to characteristic high efficiency and small power consumption

1)Municipal engineering,Wastewater treatment, constructional engineering 
2)Agricultural irrigation, transfer water etc.
3)High-rise buildings drinking water source and drainage, and for fireplace doing work
four)Factory and mining for distance drinking water provide and drainage
five)Circulation drinking water provide for manufacturing method
six)Cooling techniques of air-conditioning in hotels
7)Domestic drinking water provide


Main applications  water,sizzling water
Movement price three.seventy five-1100m3/h
Head 70-2300m
Power 220V/380/415V 3phase50hz/60hz 
Impeller substance Ductile iron, stainless steel
Pump casing material  Ductile iron, stainless steel
Driven kind Motor or Diesel motor
No of stage three-twelve
Motor power four.-8000 kw
Pace 680-5255rpm
Shaft seal Packing/Mechnical 
Medium temperature 80°C max

=== Running TIPS ===

The boiler feed multistage pump is authorized to run inside of the set parameter range only.

The multistage pump is not authorized to run with the spitting valve shut or shut to a little opening, or it will be brought on heated and duration lowered. Every multistage pump is essential to operate below the specific parameters so as to assure the circulation of it if mounted in a parallel technique.

The multistage pump can not run with the suck-in valve closed, or it may possibly be dried moving to trigger parts broken.

The medium the pump transports can not contain air or fuel, or the two movement and head of the pump could not be accurately measured and, meanwhile, grinding maybe produced to hurt parts.

This multistage pump is not authorized to transport any content with grains, or each pump efficacy and part length may be reduced.

To keep the boiler feed multistage pump in a high powerful and secure perform, it should be frequently repaired, the things of mend and the interval amongst every mend count on the operating problem and working state of it.

=== DRIVER ===

CZPT motor

The boiler feed multistage pump is pushed by the motor through the coupling The equipment, membrane coupling and hydraulic coupling can be utilised in accordance to client’s demands. The pump can be pushed by turbine or motor.The rotating path of pumps are clockwise when considered from the driving finish.





=== Functionality LIST ===

Pump Type Flow
QDG 6-25 three.75-7.five 73.five-306 4-eleven 2950
QDG twelve-twenty five 7.5-fifteen 69-338.4 five.5-22 2950
QDG 12-fifty seven.5-fifteen 139.five-648 18.5-seventy five 2950
QDG twenty five-30 fifteen-30 eighty two.five-340 15-forty five 2950
QDG twenty five-50 15-30 fifteen.seventy eight-618 22-a hundred and ten 2950
QDG forty six-thirty 30-55 81-340 22-75 2950
QDG 46-50 thirty-fifty five 138-666 37-132 2950
QDG 85-45 55-a hundred 78-459 37-one hundred sixty 2950
QDG eighty five-67 fifty five-100 183-666 ninety-250 2950
QDG155-sixty seven a hundred-185 177-684 132-four hundred 2950
QDG280-forty three 185-335 114-423 one hundred sixty-450 1480
QDG280-sixty five 185-355 372-680 five hundred-800 1480
QDG450-60 335-five hundred 171-650 360-1050 680

Sort Movement
NPSH (kw)
1QD(g)-8 a hundred and twenty-one hundred seventy 967-1040 2980 68-71 4.five 710
1QD(G)-nine a hundred and twenty-170 1088-1170 2980 68-71 four.5 800
1QD(G)-10 120-one hundred seventy 1208-1300 2980 68-seventy one four.five 800
1QD(G)-11 one hundred twenty-a hundred and seventy 1330-1430 2980 sixty eight-seventy one four.five one thousand
1QD(G)-twelve a hundred and twenty-one hundred seventy 1450-1560 2980 68-seventy one 4.five 1000
2QD(G)-eight 200-280 1184-1344 2980 74-seventy five five 1400
2QD(G)-nine 200-280 1330-1512 2980 74-75 five 1600
2QD(G)-ten 200-280 1480-1680 2980 74-seventy five five 1600
3QD(g)-ten 360-496 1470-1660 2985 eighty.one-eighty two.4 eight 2500
4QD(G)-8C 500-600 1580-1670 2985 77-80 10 3400
5QD(G)-ten five hundred-620 2100-2210 2987 eighty-eighty two 10 4800
QD(G)270-140B 270-440 1422-1570 2985 74-seventy eight 5 2300
QD(G)270-140C 270-440 1460-1750 2985 seventy five.5-79 five 2300
QD(G)400-180B 245-415 1800-1940 4640 eighty-eighty two 12 3200
QD(G)four hundred-180C 400-500 1815-1975 2985 seventy seven-79 twelve 4000
QD(G)450-a hundred and eighty 400-five hundred 1700-1920 4640 75-79 23.5 3200
QD(G)500-140 450-550 1400-1540 4640 seventy five-79 23.5 3200
QD(G)600-230 540-650 2260-2500 5410 82-86 23.five 4800
QD(G)700-170 600-740 1640-1810 5000 80-84 23.5 4500
QD(G)1000-220 900-1100 2100-2320 5255 eighty two-86 23.5 8000

=== Far more Associated Products ===

=== FAQ ===

A. The concluded supply of electric powered multistage pump group includes:

1 H2o provide pump, pre-pump and its inlet filtering display screen

2 Motor

three CZPT coupler and oil cooler for both working and lubricating oils

4 Verify valve at the outlet of the h2o pump

5 Bare minimum circulation device : includes recycling valve, quit valve and stream measurer

6 Clutch and other components

7 Oil thin station

eight Of which the motor, recycling valve, hydraulic coupler, oil thinning station, check valve,pre-pump, quit valve and stream measurer can also be bought by clients and this Co.will be in demand of technical coordination.

B. You should provide the subsequent parameters when to get the solution of this Co.:

one. Flows at the outlet of the water pump and the faucet (boosting course)

2. Pressures(or the water pump group’s head) at the outlet of the drinking water pump and the inlet of the pre-pump

3. Drinking water source temperature

4. Pump group’s kind(steam-powered or electric powered pump)

5. The installation dimensions are to be provide at order on the agreement requirement 



>>>Company Introduction

HangCZPT An Pump Equipment Co., Ltd is 1 above 30 many years knowledgeable pump maker (established at 1986) in mining and mineral, power plant, dredging and dredge, hydraulic, irrigation, pulp transfer, chemical, construction, sea h2o and oil & gas transfer and many others. An Pump Equipment is the pump factory has its very own pump choice & design, research and improvement group to assure offer you productive, energy preserving slurry pump, h2o pump, diesel drinking water pump, chemical pump and irrigation pump in assortment & design, use and maintenance system. 

An Pump Equipment is the pump manufacturing unit approved by ISO9001, ISO14001 and OHSAS18001. We also have the certificate of CE. Our manufacturing facility is above 50,000 square meters with the skilled engineer more than 20. The Max casting areas bodyweight we could do one time is 7 tons. And we have ability to make 600 tons for every month and with the warmth treatment method furnace dimension 6mx5.5mx2.5m. The Max parts we could equipment is six.4 meters and we have ability to assemble the pump more than 1800mm and our cranes potential is thirty tons.

(one). Q: Are you a trading company or manufacture?
    A: An Pump Equipment Co., Ltd is a real large professional producer far more than 32 a long time, in CZPT, generate with our possess manufacturing facility.
(2). Q: what is your factory workshops ?
    A: My factory create incorporate casting, mechanical approach, lathe method, warmth remedy, assembly, and test etc.
         Warmly welcome to go to & test my manufacturing unit any time.
(three). Q: How about your QI sequence centrifugal conclude scution h2o pump value?
    A: We are certain our price is factory value, and insist hig top quality for our extended time period cooperation.
(four). Q: What is your QI collection conclude suction h2o pump materials ?
    A: For the QI end suction water pump, we could produce forged iron, forged steel, stainless metal, bronze, and material large CrMoNi alloy.
        And we could also make as your needs.
(5).Q: What type of liquid can your QI series centrifugal stop suction h2o pump transfer?
    A: Liquid selection: h2o, chemical liquid, scorching water, sewage etc.
(six). Q:How does your manufacturing facility do regarding top quality handle? 
    A:”Good quality is precedence. we constantly attach fantastic significance to good quality controlling from the extremely starting to the really conclude.
         Our manufacturing unit has fifteen~thirty QC.
(7). Q: Is it simple for buyers to alter the elements by myselves ?
    A: sure, the structure is simple ,customers can change it extremely easliy. We will also source you routine maintenance instruments for cost-free.
(eight). Q: How about your gravel pump warranty?
    A: 1 year warranty for commplete setpump, 6-8 months for wet areas,  it depends on other pump operating issue information.
(nine). Q: How to do if the pump or areas have operatation difficulty within your guarantee?
    A:  Tell me particulars timely, and demonstrate me images, we will send you pump remedy at once with out any hesistation.
(10). Q: Can you set up the electrical motor or diesel motor with the water pump for us ?
      A: yes, we can, it’s no issue, we are knowledgeable in this .
(11): Q: .we do not know which pump design we want ,can you help us ?
      A: of course, remember to explain to me your detail requirements, contain liquid, circulation price, head and many others,
          my engineers team wiill determine & select most ideal pump design for you, offer you pump remedy for you.
(twelve). Q:How prolonged can you reply us if we deliver an inquiry ?
      A: CZPTl with in 2 hours, we will send you formal quotation sheet, with price, engineering knowledge, efficiency curve, dimension and so forth.
(13). Q: What are your advantages,why ought to I choose you?
    A:  Higher Top quality, our elements have thirty% for a longer time life than the CZPTs
         Short Shipping and delivery Time, for normal elements,we have inventory in our warehouse
         Competitive Cost, we can aid you minimize down the cost by 30% or much more
         Best Companies, we have specialized section, good quality management department and a professional revenue team, we will supply professional support for you any time. 

=== Get in touch with US ===

Andy Ma
HangCZPT AN PUMP Equipment   


Horizontal High Head Building Booster Water Pump with Multistage Impellers