Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line

Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line

Polymer Soften Pump for Plastic Extrusion Line monofilament extrusion line 

Melt pumps arrive in a selection of types and dimensions to suit the wants of your extrusion, compounding or movie blowing , sheet , cast movie , pipe and  other polymer creation method.

Benifits of the metering pump soften equipment pump
one. Stabilizing the output pressure—the pressure on extruder can be reduced by 30%-fifty% after using melt pumps.
two. improving the product quality
3. increasing the extrusion output—reducing pressure on screw and chaning the building pressure from “screw to die” to “melt pump to die”, so the screw can extrude the products with high efficiency. Mean while the back-pressure on the extruder can be adjusted, reducing the melt residence in screw cylinder, stabilizing the plasticizing process and improving the product’s quality and quantity.
4. prolonging the working life—the pressure of extruder screw can be lowered after using the melt pumps, so screw wear can be reduced consumable

Melt gear pump we produced 

Technica information
1.Rotate speed: ≤60rpm(Adjustable)
two.Temperature: 400°C (max.) 
3.Max.Outlet pressure: 350Bar
four.Max.Differential pressure: 275Bar 
5.Heating method: Stainless Steel Cartridge Heater
six.Fastening parts:  12.9 high-strength screws
7.Voltage: 380V(Others are optional)
8.Frequency: 50Hz(Others are optional)

Specialized parameter 

Sort Quantity
(cc/r)
Max rotary
Speed
(r/min)
Outlet strain
(MPa)
Inlet strain
(MPa)
Movement rate      L/h Temperature
 
Minimal viscosity
one-1000Pa·s
High viscosity 1000~8000Pa·s  
Ultra-high
Viscosity
≥8000Pa·s
GM-ME-five 5. one hundred ≤35 ~30 ≤20 ≤12 ≤8 ≤350ºC
GM-ME-7.five seven.five 100 ≤35 ~30 ≤20 ≤18 ≤10
GM-ME-10 ten 100 ≤35 ~30 ≤20 ≤25 ≤15
GM-ME-20 twenty 90 ≤35 ~thirty ≤80 ≤40 ≤24
GM-ME-31.five 31.5 90 ≤35 ~30 ≤150 ≤80 ≤42
GM-ME-fifty fifty eighty ≤35 ~thirty ≤220 ≤120 ≤70
GM-ME-seventy five 75 80 ≤35 ~thirty ≤280 ≤180 ≤90
GM-ME-a hundred one hundred eighty ≤35 ~30 ≤350 ≤230 ≤120
GM-ME-one hundred sixty one hundred sixty 80 ≤35 ~thirty ≤550 ≤350 ≤175
GM-ME-two hundred two hundred eighty ≤35 ~30 ≤700 ≤450 ≤250
GM-ME-250 250 80 ≤35 ~30 ≤800 ≤600 ≤300
GM-ME-355 355 80 ≤35 ~thirty ≤1000 ≤750 ≤350
GM-ME-500 five hundred sixty ≤35 ~30 ≤1500 ≤1000 ≤500
GM-ME-750 750 60 ≤35 ~thirty ≤1850 ≤1500 ≤750
GM-ME-1000 one thousand 60 ≤35 ~thirty ≤3000 ≤2000 ≤1000
GM-ME-1600 1600 fifty ≤35 ~thirty ≤4000 ≤3000 ≤1500
GM-ME-2500 2500 50 ≤35 ~30 ≤6000 ≤4500 ≤2200
GM-ME-3150 3150 fifty ≤35 ~thirty ≤7000 ≤5200 ≤2600
GM-ME-4000 4000 40 ≤35 ~thirty ≤8000 ≤6000 ≤3000
Remark:the soften equipment pump movement is associated with the perform pace, materials viscosity, stress,
So the product assortment you should inquire for us.

Software fields

Polymer Soften(film, pipe, plate, sheet, granulation )
Higher Temperature or Large Viscosity Components (Laptop, PMMA, Stomach muscles, HIPS, PET, PVB, PS, PP, PA, PE, PVA)
Chemical Fiber Melt (polyester for cotton-fiber, polypropylene )
Other Polymer Soften Resources (rubber, asphalt, paint, adhesives, coatings, lubricants)

 

Polymer Melt Pump for Plastic Extrusion Line Monofilament Extrusion Line

Tags: