LR Hyperbolic electrical power management
Electronic proportional manage EO
|forty,71,one hundred twenty five,one hundred eighty,250,
three hundred,355,370,five hundred
|Typical stress: 35Mpa,
Peak force: 42Mpa.
|Axial piston variable displacement pump with swashplate construction for hydrostatic transmission in open circuit
– The movement charge is proportional to the input speed and displacement. The flow charge can be steplessly modified by changing the swashplate.
– Layout of Slot Manage Swashplate
– Stepless adjustable displacement
– Excellent oil absorption performance
– Permissible rated functioning pressure 350 bar
– Reduced noise level
– Extended provider lifestyle
– Driving shaft absorbs axial and radial loads
– Substantial electricity/excess weight ratio
– Common composition
– Quick control time
– Axle generate and pump can be combined
– Swashplate swing angle indicator
– Installation spot is optional
– HF oil can be utilised when the operating parameters are diminished.
|Basic safety instructions
|1, A4VSO pump is developed to function in open circuit.
Method design and style, set up and commissioning want to be done by trained specialists and distributors
|2, All hydraulic orifices can only be used to tighten hydraulic upkeep pipelines
|1,All the tightening torques shown in this sample are highest values and ought to not exceed these values (optimum of internal threads in castings). Please comply with the info supplied by the producer concerning the optimum allowable fastening torque of the fittings employed.
· For DIN thirteen-compliant fastening screws, it is suggested that the allowable tightening torque be checked in accordance to VDI 2230 (promulgated in 2003) in all instances.
|two,The housing, specifically the coil, may possibly be specifically hot throughout or soon right after the operation of the pump. Make sure you get appropriate basic safety actions (for example, put on protecting clothes).
– All information and information offered with the merchandise should be complied with
|three,All data and info offered with the solution need to be complied with..
|one,Optional. For the duration of debugging, oil need to be injected into the pump housing, and it need to be loaded when it is working.
In get to reduce the working noise amount, all connecting pipes (oil suction, force and tank drain pipes) must be separated from the tank by utilizing versatile elements
|2,It is required to stay away from the use of one-way valves in tank discharge pipelines.
The tank discharge pipeline need to be right connected again to the tank with out changing the dimensions of the pipeline. There might be irregular predicament, remember to consult us in time.
It can be mounted vertically and horizontally.